Inorganic compounds include compounds that are made up of two or more elements other than carbon, as well as certain carbon-containing compounds that lack carbon-carbon bonds, such as cyanides and carbonates. Inorganic compounds are most often classified in terms of the elements or groups of elements that they contain. Oxides, for example, can be either ionic or molecular. Ionic oxides contain O2− (oxide) ions and metal cations, whereas molecular oxides contain molecules in which oxygen (O) is covalently bonded to other nonmetals such as sulfur (S) or nitrogen (N).
When ionic oxides are dissolved in water, the O2− ions react with water molecules to form hydroxide ions (OH−), and a basic solution results. Molecular oxides react with water to produce oxyacids, such as sulfuric acid (H2SO4) and nitric acid (HNO3). In addition, inorganic compounds include hydrides (containing hydrogen atoms or H− ions), nitrides (containing N3− ions), phosphides (containing P3− ions), and sulfides (containing S2− ions).
Transition metals form a great variety of inorganic compounds. The most important of these are coordination compounds in which the metal atom or ion is surrounded by two to six ligands. Ligands are ions or neutral molecules with electron pairs that they can donate to the metal atom to form a coordinate-covalent bond.
The resulting covalent bond is given a special name because one entity (the ligand) furnishes both of the electrons that are subsequently shared in the bond. An example of a coordination compound is [Co(NH3)6]Cl3, which contains the Co(NH3)63+ ion, a cobalt ion (Co3+) with six ammonia molecules (NH3) attached to it, acting as ligands.
In the early days of the science of chemistry, there was no systematic approach to naming compounds. Chemists coined names such as sugar of lead, quicklime, milk of magnesia, Epsom salts (see magnesium), and laughing gas to describe familiar compounds. Such names are called common or trivial names. As chemistry advanced, it became evident that, if common names were used for all known compounds, which number in the millions, great confusion would result. It clearly would be impossible to memorize trivial names for such a large number of compounds. Therefore a systematic nomenclature (naming process) has been developed. There are, however, certain familiar compounds that are always referred to by their common names. The systematic names for H2O and NH3, for example, are never used; these vital compounds are known only as water and ammonia, respectively.
The simplest chemical compounds are binary compounds—those consisting of two elements. Different rules apply for the nomenclature of binary ionic compounds and binary molecular (covalent) compounds, and so they will be considered separately.
Binary compounds
Binary ionic compounds
The nomenclature for binary ionic compounds simply entails naming the ions according to the following rules:
- The positive ion (called a cation) is named first and the negative ion (anion) second.
- A simple cation (obtained from a single atom) takes its name from its parent element. For example, Li+ is called lithium in the names of compounds containing this ion. Similarly, Na+ is called sodium, Mg2+ is called magnesium, and so on.
- A simple anion (obtained from a single atom) is named by taking the root of the parent element’s name and adding the suffix -ide. Thus, the F− ion is called fluoride, Br− is called bromide, S2− is called sulfide, and so on.
The following examples illustrate the nomenclature rules for binary ionic compounds:
| compound | ions present | name |
|---|---|---|
| NaCl | Na+, Cl− | sodium chloride |
| KI | K+, I− | potassium iodide |
| CaS | Ca2+, S2− | calcium sulfide |
| CsBr | Cs+, Br− | cesium bromide |
| MgO | Mg2−, O2− | magnesium oxide |
In the formulas of ionic compounds, simple ions are represented by the chemical symbol for the element: Cl means Cl−, Na means Na+, and so on. When individual ions are shown, however, the charge is always included. Thus, the formula of potassium bromide is given as KBr, but, when the potassium and bromide ions are shown individually, they are written K+ and Br−.
When a given metal atom can form more than one type of cation, the charge on the particular cation present must be specified in the name of the compound. For example, lead (Pb) can exist as Pb2+ or Pb4+ ions in ionic compounds. Also, iron (Fe) can form Fe2+ or Fe3+ ions, tin (Sn) can form Sn2+ or Sn4+ ions, gold (Au) can form Au+ or Au3+ ions, and so on. Therefore, the names of binary compounds containing metals such as these must include a Roman numeral to specify the charge on the ion. For example, the compound FeCl3, which contains Fe3+, is named iron(III) chloride. On the other hand, the compound FeCl2, which contains Fe2+, is designated as iron(II) chloride. In each case, the Roman numeral in the name specifies the charge of the metal ion present.
| Common simple cations and anions | |||
|---|---|---|---|
| cation | name | anion | name |
| H+ | hydrogen | H− | hydride |
| Li+ | lithium | F− | fluoride |
| Na+ | sodium | Cl− | chloride |
| K+ | potassium | Br− | bromide |
| Cs+ | cesium | I− | iodide |
| Be2+ | beryllium | O2− | oxide |
| Mg2+ | magnesium | S2− | sulfide |
| Ca2+ | calcium | ||
| Ba2+ | barium | ||
| Al3+ | aluminum | ||
| Ag+ | silver |
An alternative system for naming compounds containing metals that form only two ions is sometimes seen, especially in older literature. The ion with the higher charge has a name ending in -ic, and the one with the lower charge has the suffix -ous. For example, Fe3+ is called the ferric ion, and Fe2+ is called the ferrous ion. The names for FeCl3 and FeCl2 are then ferric chloride and ferrous chloride, respectively.
| Common ions that form multiple cations | ||
|---|---|---|
| ion | systematic name | alternate name |
| Fe3+ | iron(III) | ferric |
| Fe2+ | iron(II) | ferrous |
| Cu2+ | copper(II) | cupric |
| Cu+ | copper(I) | cuprous |
| Co3+ | cobalt(III) | cobaltic |
| Co2+ | cobalt(II) | cobaltous |
| Sn4+ | tin(IV) | stannic |
| Sn2+ | tin(II) | stannous |
| Pb4+ | lead(IV) | plumbic |
| Pb2+ | lead(II) | plumbous |
| Hg2+ | mercury(II) | mercuric |
| Hg22+(*) | mercury(I) | mercurous |
| *Mercury(I) ions always occur bound together to form Hg22+. |
Binary molecular (covalent) compounds
Binary molecular (covalent) compounds are formed as the result of a reaction between two nonmetals. Although there are no ions in these compounds, they are named in a similar manner to binary ionic compounds. The nomenclature of binary covalent compounds follows these rules:READ MORE ON THIS TOPICrare-earth element: CompoundsThe rare-earth elements form tens of thousands of compounds with all the elements to the right of—and including—the group 7 metals (manganese,…
- The first element in the formula is given first, using the element’s full name.
- The second element is named as if it were an anion.
- Prefixes are used to denote the numbers of atoms present. If the first element exists as a single atom, the prefix mono- is omitted. For example, CO is called carbon monoxide rather than monocarbon monoxide.
These examples show how the rules are applied for the covalent compounds formed by nitrogen and oxygen:
| compound | systematic name | common name |
|---|---|---|
| N2O | dinitrogen monoxide | nitrous oxide (laughing gas) |
| NO | nitrogen monoxide | nitric oxide |
| NO2 | nitrogen dioxide | |
| N2O3 | dinitrogen trioxide | |
| N2O4 | dinitrogen tetroxide | |
| N2O5 | dinitrogen pentoxide |
To avoid awkward pronunciations, the final o or a of the prefix is often dropped when the element name begins with a vowel. For example, N2O4 is referred to as dinitrogen tetroxide, not dinitrogen tetraoxide, and CO is called carbon monoxide, not carbon monooxide.
| Prefixes used in chemical nomenclature | |
|---|---|
| prefix | number of atoms |
| mono- | 1 |
| di- | 2 |
| tri- | 3 |
| tetra- | 4 |
| penta- | 5 |
| hexa- | 6 |
| hepta- | 7 |
| octa- | 8 |
Nonbinary compounds
Ionic compounds containing polyatomic ions
A special type of ionic compound is exemplified by ammonium nitrate (NH4NO3), which contains two polyatomic ions, NH4+ and NO3−. As the name suggests, a polyatomic ion is a charged entity composed of several atoms bound together. Polyatomic ions have special names that are used in the nomenclature of the compounds containing them.
| Common polyatomic ions | ||||
|---|---|---|---|---|
| ion | name | ion | name | |
| NH4+ | ammonium | CO32− | carbonate | |
| NO2− | nitrite | HCO3− | hydrogen carbonate** | |
| NO3− | nitrate | ClO− | hypochlorite | |
| SO32− | sulfite | ClO2− | chlorite | |
| SO42− | sulfate | ClO3− | chlorate | |
| HSO4− | hydrogen sulfate* | ClO4− | perchlorate | |
| OH− | hydroxide | C2H3O2− | acetate | |
| CN− | cyanide | MnO4− | permanganate | |
| PO43− | phosphate | Cr2O72− | dichromate | |
| HPO42− | hydrogen phosphate | CrO42− | chromate | |
| H2PO4− | dihydrogen phosphate | O22− | peroxide | |
| *Bisulfate and **bicarbonate are widely used common names for hydrogen sulfate and hydrogen carbonate, respectively. |
Several series of polyatomic anions exist that contain an atom of a given element in combination with different numbers of oxygen atoms. Such anions are called oxy anions. When the series contains only two members, the name of the ion with fewer oxygen atoms ends in -ite, and the name of the other ion ends in -ate. For example, SO32− is called sulfite and SO42− is called sulfate. In those cases where more than two oxy anions constitute the series, hypo- (less than) and per- (more than) are used as prefixes to name the members of the series with the smallest and the largest number of oxygen atoms, respectively. The chlorine-containing oxy anions provide an example:
| ClO− | hypochlorite | |
| ClO2− | chlorite | |
| ClO3− | chlorate | |
| ClO4− | perchlorate |
Naming ionic compounds that contain polyatomic ions is similar to naming binary ionic compounds. For example, the compound NaOH is called sodium hydroxide, because it contains the Na+ (sodium) cation and the OH− (hydroxide) anion. As in binary ionic compounds, when a metal that can form multiple cations is present, a Roman numeral is required to specify the charge on the cation. For example, the compound FeSO4 is called iron(II) sulfate, because it contains Fe2+.
Acids
An acid can be thought of as a molecule containing at least one hydrogen cation (H+) attached to an anion. The nomenclature of acids depends on whether the anion contains oxygen. If the anion does not contain oxygen, the acid is named with the prefix hydro- and the suffix -ic. For example, HCl dissolved in water is called hydrochloric acid. Likewise, HCN and H2S dissolved in water are called hydrocyanic and hydrosulfuric acids, respectively.
If the anion of the acid contains oxygen, the name is formed by adding the suffix -ic or -ous to the root name of the anion. If the anion name ends in -ate, the -ate is replaced by -ic (or sometimes -ric). For example, H2SO4 contains the sulfate anion (SO42−) and is called sulfuric acid; H3PO4 contains the phosphate anion (PO43−) and is called phosphoric acid; and HC2H3O2, which contains the acetate ion (C2H3O2−), is called acetic acid. For anions with an -ite ending, the -ite is replaced by -ous in naming the acid. For example, H2SO3, which contains sulfite (SO32−), is called sulfurous acid; and HNO2, which contains nitrite (NO2−), is named nitrous acid. The acids of the oxy anions of chlorine are used here to illustrate the rules for naming acids with oxygen-containing cations.
| Names of less common acids | |
|---|---|
| formula | name |
| H3BO3 | orthoboric acid* |
| H2CO3 | carbonic acid |
| H3PO4 | orthophosphoric acid** |
| H4P2O7 | pyrophosphoric acid |
| H5P3O10 | triphosphoric acid |
| (HPO3)n | metaphosphoric acid |
| (HPO3)3 | trimetaphosphoric acid |
| H3PO3 | phosphorous acid |
| H3PO2 | hypophosphorous acid |
| H2SO5 | peroxosulfuric acid |
| H2S2O6 | dithionic acid |
| H2S2O3 | thiosulfuric acid |
| HMnO4 | permanganic acid |
| *Often called boric acid. **Often called phosphoric acid. |
| Names of common acids | |
|---|---|
| formula | name |
| HF | hydrofluoric acid |
| HCl | hydrochloric acid |
| HBr | hydrobromic acid |
| HI | hydroiodic acid |
| HCN | hydrocyanic acid |
| H2S | hydrosulfuric acid |
| HNO3 | nitric acid |
| HNO2 | nitrous acid |
| H2SO4 | sulfuric acid |
| H2SO3 | sulfurous acid |
| HC2H3O2 | acetic acid |
| acid formula | anion | name |
|---|---|---|
| HClO4 | perchlorate | perchloric acid |
| HClO3 | chlorate | chloric acid |
| HClO2 | chlorite | chlorous acid |
| HClO | hypochlorite | hypochlorous acid |
Compounds with complex ions
A coordination compound is composed of one or more complex structural units, each of which has a central atom bound directly to a surrounding set of groups called ligands. The nomenclature of coordination compounds is based on these structural relationships.
https://www.britannica.com/science/chemical-compound/Classification-of-compounds#ref79410
Science 